TESCOM 390WATT MONO PERC CRYSTALLINE SOLAR MODULE
₦69990 %7,5
Designed by TESCOM ‘AS’ based on European Standard
Maximum Power: 390watt
Optimum Power Voltage (Vmp): 40.5
Optimum Operating Current (Lmp): 9.64
Open Circuit Voltage (VOC): 48.4
Short Circuit Current (Lsc): 10.16
Number of cells: 144 [ 2 X (12 X 6) ]
Weight: 23KG (50.7Lb)
Module Dimension: 2024 X 1002 X 35mm (79.7 X 39.2 X 1.4 inches)
5 in stock (can be backordered)
- Higher module conversion efficiency (Maximize limited space with PERC mono high-efficiency cells Half-cell design, lower Rs loss, lower hot spot temperature 5BB cell and MBB cell are optional)
- Highly reliable due to stringent quality control (100% EL double inspection In-house testing goes well beyond certification requirements)
- Excellent low light performance (Excellent low light performance on cloudy days mornings and evenings)
- Certified to withstand the most challenging environment (2400 Pa wind load • 5400 Pa snow load • 25 mm hail stones at 82 km/h)
- High system voltage Compatible (Maximum 1500 VDC system voltage saves total system cost)
- IP67 junction box (High waterproof level for long term weather endurance)
NPDC OKPOHO PLATFORM SOLAR SYSTEM UPGRADE
Day 1 –
11th April 2021
Materials arrived site and work commenced immediately with offloading of Project materials from the Vessel.
We started engaging additional hands.
Day 2-
12th April 2021
Installation of profiles for the Solar panels and subsequently installing the panels. At the close of work, a total of 10 panels was laid and installed at the accommodation rooftop. See the picture below:
Day 3 –
13th April 2021
Solar panels Installation continue, though we had a little challenge of managing the spaces on the accommodation cabin roof so as to contain all the 24 pannels as planned. In the end, we were able to have the 24 panels installed. See shots below:
Reviews
There are no reviews yet.